After purchasing your Atmotube PRO, you need to install both the official Atmotube and the PlanetWatch Wearable Apps on your smartphone.

➡️  Make sure that both Bluetooth and GPS 🛰️ are switched on.

➡️  Install first the official Atmotube App in your smartphone. You can find it on Google Play for Android users and in the App Store for iOS users.

 

➡️  When you first open the App, you will be prompted to connect to your Atmotube PRO by clicking the Connect button on it.

➡️  You will then be prompted to allow the App to access your device location. In order for your sensor to function properly, you will need to select Allow all the time.

Set in Always mode your Atmotube on Menu > Settings > Mode.

The App will then run through the calibration 🧭 procedure, and air quality data will soon appear on your screen.

If the App prompts you to update your firmware device, do it!

➡️  Once this has happened, you can close the App. For the Android App only – tap on the Atmotube icon at the top of your screen and select STOP:

➡️  Next, you need to connect 🔗 your Atmotube PRO sensor to the PlanetWatch network. To do this, you will need to download the PlanetWatch Wearable App from either Google Play or the iOS App Store. Once installed, open the App.

 

➡️ To register your Atmotube PRO sensor, click on the Access icon and follow the steps to create your Algorand account. Make sure you use the same email address that you used when you purchased the license.

If you want to transfer a license to a different email address, please open a ticket and provide us with the new email addresses that you want associate to the licenses. 

As final step you have to create your PIN for the PlanetWatch App: please note to don’t put 0 as first digit for your PIN. Please note that you can change your PIN on the Explorer by clicking on the sensor, then on “Update PIN” in the sensor board.

⚠️Always back up your passphrase. If you forget your passphrase, your Planets will be lost⚠️

You are now ready to view your air quality data and send them to PlanetWatch to receive rewards!

After registration, you can click on Access again to display your dashboard, or click on the Home icon in the top right-hand corner at any time to return to the dashboard.

🔹 Tap the Sensor icon to view and send your data.

🔹 Tap the Map icon to locate your sensor on the map.

Please note – the App can only manage one sensor at a time. Only tap the Reset icon if you want to connect and register a different sensor.

Once you have successfully connected the sensor with the PlanetWatch App you can monitor the air quality around you and start taking looking after your health and the health of your family 🌿.

Comments

0 comments

Please sign in to leave a comment.